12867
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.


Nyhetsmail

Motta nyheter per epost.

Vicon 2MP MKII replacement drive

w/ customer interface board, PoE++ 60W

Varenr:
SN30S
SN30S Vicon  Vicon 2MP MKII replacement drive w/ customer interface board, PoE++ 60W
SN30S Vicon  Vicon 2MP MKII replacement drive w/ customer interface board, PoE++ 60W
Lenker: Produkt | Produsent | Support

Vicon has enhanced the proven high-performance design of the Surveyor series of dome cameras with high definition (HD) video. The camera’s superb HDTV quality video, low light capabilities and durability deliver a superior pan, tilt and zoom solution to customers. The new design conforms to the ONVIF (Profile S Open Network Video Interface Forum) specification, providing interoperability between network video products from different manufacturers. The camera delivers resolutions up to 1080P (1920 x 1080). The Surveyor MKII supports high-profile H.264 and M-JPEG compression as well as multi-stream format capabilities to deliver bandwidth efficient high quality video. WIth its 30x zoom, the camera can read a license plate 900 ft away. Electronic Image Stabilization compensates for vibration or movement of the camera, automatically minimizing blur. Defog and image overlay are also supported. The Surveyor MKII can be programmed directly through a standard Web Browser. The advanced scheduling capabilities allow users to automate camera positioning based on schedules and alarm inputs. Programmable privacy masks are used to conceal user-defined areas. Limits to the pan and tilt of the unit can also prevent operators from viewing restricted areas. Titles can be programmed in the unit to provide the operator with additional graphical information when controlling the camera.

Vicon has a variety of hardware available to install the Surveyor MKII in almost any environment. A pendant configuration is available, with a standard, pressurized, or high-impact housing. The pressurized and impact resistant versions of the lower dome are constructed of impact-resistant, polycarbonate; the impactresistant version lower domes are secured by tamperproof screws.
The standard and high-impact units are IP66 rated; the pressurized version of the camera provides IP67 protection. These units have built-in heater/blower units that ensure operation in a temperature range of -40° to
 132° F (-40° to 55° C)



Copyright © 2019 Vicon Norway AS - All rights reserved
Forretningssystem og netthandel er levert av MultiCase™ Norge AS

(3.16.4.19)